![]() Note: The water repellency of this device is tested by using a flow rate of 0.1 l/min per hole (the number of holes depends on the size of the swing tube), a water spray angle of ☑80 ° and a pressure of 80~100 kPa the device is rotated 90 ° horizontally after 5 minutes, and the water flow continues for a total of 10 minutes. In addition, do not immerse the unit in any water or liquid, and please note that this device has a USB-C ® charging port, and the USB-C ® port must be thoroughly dried before charging. seawater, salt water, chlorinated water and beverages). The IP54 water-repellent function of this device is only suitable for general tap water or freshwater, and not for contact with other types of water or liquids (e.g. ( ) The water repellency may deteriorate over time under normal conditions of use, or if the unit is damaged, repaired or disassembled or not observe the correct precautions. Water splashed against the enclosure from any direction will have no harmful effects. IP54 resistance protects against splashing water. The device has been tested for water resistance using the IEC 60529 standard and has achieved an IP54 rating.HyperFusion feature only support in certain software applications.Test result provided by ASUS labs, compared to ROG Phone 6.Test result provided by ASUS labs, compared to the dual front-facing speakers on ROG Phone 7 without AeroActive Cooler attached on.Actual performance may vary depending on conditions. Test result provided by ASUS labs, compared to AeroActive Cooler 6.Measurement result provided by ASUS labs, compared to ROG Phone 6. 10% improved thermal efficiency for reducing surface temperature.Manufacturer’s performance data, compared to Snapdragon ® 8+ Gen 1.Typical capacity is 3000 mAh in both battery units. Issues, ideas and pull requests are all appreciated. > -V, -version print the current versionĬontributions are welcome. > -v, -verbose some messages will be more detailed > -m METHOD, -method METHOD specify which method to use > -f VALUE, -fade VALUE fade the brightness to this value > -g, -get get the current screen brightness > -s VALUE, -set VALUE set the brightness to this value > -d DISPLAY, -display DISPLAY the display to be used > -h, -help show this help message and exit Command Line python -m screen_brightness_control -help get_brightness ( display = monitor ), '%' )Ĭheck out the quick start guide for more details on each of these functions.įull documentation for the project is also available here. list_monitors (): print ( monitor, ':', sbc. get_brightness ( 100, display = 0 ) # show the current brightness for each detected monitor for monitor in sbc. set_brightness ( 100 ) # set the brightness to 100% for the primary monitor sbc. get_brightness ( display = 0 ) # set the brightness to 100% sbc. get_brightness () # get the brightness for the primary monitor primary = sbc. Usage API import screen_brightness_control as sbc # get the brightness brightness = sbc. Please see the installing on Linux documentation for more details. Installing on Linux usually requires some extra work after installing the module. Pip install screen-brightness-control GitHub: git clone ![]() Supports Windows and most flavours of Linux. A Python tool for controlling the brightness of your monitor.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |